友绿百科 >>所属分类 >> LEED    低碳经济    绿色建筑    住宅产业化   

Durability Management Process 编辑词条 发表评论(0)

A section in LEED for Homes which promotes durability and high performance of the building enclosure and its components and systems through appropriate design, materials selection and construction practices.
The whole process consists of three procedures, these are Durability Planning (Prereq) , Durability Management (Prereq), Third-Party Durability Management Verification .

1. Durability Planning (Prereq) – Prior to construction, the project team must do the following:
Complete Durability Risk Evaluation Form (Part of the LEED Checklist spreadsheet).
Develop specific measure to respond to durability issues.
Identify and incorporate indoor moisture control measures (see table below).
Incorporate above measures into construction documentation as needed.
List all durability measures in a durability inspection checklist (Part of the LEED Checklist spreadsheet).
2. Durability Management (Prereq) – During construction, the builder needs to check off each measure in the durability checklist as it is completed.
3. Third-Party Durability Management Verification (3 points) – Have the Green Rater inspect and verify each measure listed in the durability inspection checklist was completed.

附件列表


→如果您认为本词条还有待完善,请 编辑词条

上一篇Environmental Attributes下一篇green seal

词条内容仅供参考,如果您需要解决具体问题
(尤其在法律、医学等领域),建议您咨询相关领域专业人士。
0

收藏到: Favorites  

词条信息

william0515
william0515
书童
词条创建者 发短消息   

相关词条